Document Outline

• Table of Contents
• Camera Parts and Functions
  • Dual-mode Buttons DSj|
  • Using Battery Pack
  • BP-E77KIBEI/BP-E722 (option) | Battery Pack
  • Attaching Battery Pack lEgl
  • 1. Slide battery pack into power source compartment.
  • 2. Press battery pack until it clicks and locks in place.
  • Removing Battery Pack
  • 1. Slide and hold ВАТТ EJECT switch up.
  • 2. Pull battery pack out, as shown.
  • Charging Battery Pack
  • Using AC Power
  • CA-100 Compact Power Adapter
  • Using Car Battery
  • CB-110 Car Battery Adapter (option)
  • Attaching DC Coupler lEEl
  • 1. Insert DC-100 DC Coupler into power source compartment.
  • 2. Connect DC-100 cable to compact power adapter (or car battery adapter).
  • 1. Turn camera on by pressing OPERATE button.
  • 2. Press and hold SET button for more than 3 seconds. BKl
  • 3. Press + and - buttons to scan year display.
  • 4. Press SHIFT button when correct year is shown.
  • 5. Press + and - buttons to scan month display.
  • 6. Press SHIFT button when correct month is shown.
  • 7,9
    • 7. Press + and - buttons to scan day display.
    • 8. Press SHIFT button when correct day is shown.
    • 9. Press + and - buttons to scan hour display.
    • 10. Press SHIFT button when correct hour is shown.
  • 12
    • 11. Press -I- and - buttons to scan minute display.
    • 12. Press SET button when correct minute is shown.
• Camera Preparations
  • Attaching Strap
  • SS-300 Shoulder Strap BigSl
  • WS-20 Wrist Strap (option) gan
  • Adjusting Diopter 27-a
  • Adjusting 180'' FiexiGrip with Integral Electronic Vievrfinder 27-B
  • Sports Finder 27-c •
  • 1. Attach power source.
  • 2. Turn camera on.
  • 3. Press EJECT button.
  • 4. Load video cassette and close video cassette compartment.
  • 5. Press SP/LP button to select tape mode.
  • 6. Turn grip to desired position.
  • Tape Counter
  • Recording Reminder
  • Video Cassette Warning з2-а
  • Battery Pack Warning з2-в
  • About Backlighting 32-c
  • Recording Using Tripod 32-D
  • Record Search (Assembly Editing) (CAMERA Mode)
  • 1. Place camera in record pause mode, icicgl
  • 2. Press -f or - button to scroll forward or backward to locate recording start position.
  • 3. Press start/stop button.
  • Record Review (camera Mode)
  • 1. Place camera in record pause mode. icgRl -
  • 2. Press Cs] button.
  • 3. Press start/stop button to resume recording.
  • Record search (to resume recording)
  • Record review jcHSl
• Recording Date and Time (camera Mode)
  • 1. Place camera in record pause mode, icngii
  • 2. Press DATE button to select display for recording as follows:
  • 3. Make your recording as normal.
  • Subjects Not Suitable for Autofocus
  • Manual Focus
  • 1. Press AF/MANUAL button to select manual focus.
  • 2. Rotate zooming lever to telephoto end.
  • 3. Look through viewfinder and rotate focusing ring to focus on subject
  • 4. Use zooming iever to frame subject properly.
  • Focus Lock
• Macro ROCOrdiriQ (camera Mode)
  • 1. Press AF/MANUAL button to select manual - focus.
  • 2. Rotate zooming lever to wide-angle end.
  • 3. Press and hold macro button on zooming lever and move lever into macro range.
  • 4. Approach subject to desired size in viewfinder.
  • 5. Use zooming lever within macro range for fine focusing.
  • 6. When macro recording is completed, reverse steps 2 and 3.
  • Power Zoom 41-A
  • Manual Zoom 4i-b
  • Wireless Zoom 4i-c
  • What is White Balance?
  • Auto White Balance
  • Subjects Not Suitable for Auto White Balance 42-a
  • White Balance Lock
  • 2,4
    • White Balance Lock Procedure
    • 1. Point camera lens at a white ol^ect (such as a sheet of paper) for 10 seconds, so it completely fills viewfinder.
    • 2. Press AWB/LOCK/GAIN UP button.
    • 3. Make your recording.
    • 4. Press AWB/LOCK/GAIN UP button again to reset auto white balance.
    • Attaching Video Light 44-a
    • 1. Insert video light plug into accessory shoe on the camera.
    • 2. Slide video light into accessory shoe until it stops.
    • Removing Video Light 44-b
    • 1. Press and hold lock release button.
    • 2. Slide video light out of accessory shoe.
    • Shooting with Video Light
    • 1. Place camera in record pause mode. Etf-l
    • 2. Press video light power button.
    • 3. Press start/stop button to start shooting.
    • 1. Press and hold AWB/LOCK/GAIN UP button for more than 3 seconds.
    • 2. Make your recording.
    • 3. Press AWB/LOCK/GAIN UP button for more than 3 seconds to cancel gain-up.
    • 1. Point camera at subject and compose scene in viewfinder.
    • 2. Press SHUTTER button.
    • 3. Make your recording.
    • 4. Press SHUTTER button to return to normal shutter speed.
    • Wireless Fade
    • 1. Place camera in record pause mode. iaa?i
    • 2. Press F. START/STOP button.
    • 3. When scene is recorded, press F. START/STOP button again.
    • 1. Place camera in record pause mode.
    • 2. Press SELF/INT. button.
    • Press + and - buttons to select desired mode.
    • 4. Press start/stop button to start recording.
    • 5. Press start/stop button again to stop recording.
    • Creating Character Titles
    • 1. Place camera in CAMERA mode.
    • 2. Press SET button to display title lines in viewfinder.
    • 3. Press SHIFT button to move the cursor to position where you want to start the title,
    • 4. Use + and - buttons to scan list of title characters.
    • 5. When the character you want is displayed, press SHIFT button again to move to next cursor position. ^2]
    • 6. Follow steps 4 and 5 until your title is complete.
    • 7. When the title is finished, press SET button.
    • 2. Press C. TITLE button to select the type of scrolling you want:
    • 3. Press SET button.
    • Creating Digital Titles
    • 1. Place camera in CAMERA mode.
    • 2. Frame your image and press MEMO button.
    • 3. Press COLOUR button to select desired colour.
  • 3,4
  • 3,4
    • Recording Titles
    • 1. Place camera in record pause mode.
    • 2. Press start/stop button to start recording.
    • 3. Press C. TITLE or DISPLAY button.
    • 4. Press C. TITLE or DISPLAY button again to end title recording.
    • Adjusting Image Density (Digital Title)
• Playback Connection (play Mode)
  • Using TV with Audio/Video Input Terminals
  • Connection Procedure
  • Connection Procedure
  • a
    • Using TV with SCART Terminal
    • Connection Procedure STll^l©
    • Connection Procedure
    • Selecting Video Channel (European model)
    • 1. Turn TV on.
    • 2. Turn camera on.
    • 3. Press MODE SELECT button to select PLAY mode.
    • 4. Press >■ (PLAY) button to start playback.
    • 5. Set RF unit’s G/l selector using flat-edge screwdriver.
    • 6. Set TV and video channel selector to video channel (video channel selector is factory-set to CH 32).
    • Selecting Video Channel (Australian model)
    • 1. Turn TV on.
    • 2. Turn camera on.
    • 3. Press MODE SELECT button to select PLAY mode.
    • 4. Press >■ (PLAY) button to start playback.
    • 5. Set TV and video channel selector to video channel (video channel selector is factory-set to 1CH) using a flat-edge screwdriver.
    • 1. Turn camera on.
    • 2. Press MODE SELECT button to select PLAY mode.
    • 3. Press EJECT button.
    • 4. Load video cassette in camera and close video cassette compartment.
    • 5. Locate playback start point.
    • 6. Press > (PLAY) button to start playback.
    • 7. Press ■ (STOP) button to end playback.
    • 8. Turn camera off.
    • PLAY Mode
    • High-Frequency Feedback
• Special Playback Methods
  • A. Fast Forward Playback
  • B. Rewind Playback
  • C. Still Playback
  • Tap© R©tUrn (PLAY Mode)
  • 1. When you locate a scene during playback that you want to watch again later, press COUNTER RESET button.
  • 2. Press ■ (STOP) button when playback finishes.
  • 3. Press TAPE RETURN button.
  • 4. Press ► (PLAY) button.
• Editing to Another VTR (PLAY Mode)
  • Connection Procedure STIIIRE©
  • Connection Procedure
  • Preparations TV
  • VTR
  • Adding Tities
• Carrying Cases
  • o oe
    • SC-800 Soft Carrying Case
    • HC-60 System Case
• Optional Accessories
  • CB-110 Car Battery Adapter
  • BP-E722 Battery Pack
  • MC-100 Multi-battery Charger
  • RS-60 Rain Shield
  • VL-20 Battery Video Light
  • TL-37 Tele-converter
  • WD-37 Wide-converter
  • FS-37 Filter Set
  • FS-37U Filter Set
  • MM-200 Stereo Mixing Microphone
  • ZM-100 Stereo/Zoom Microphone
  • MB-100 Microphone Boom
  • SA-1 Adapter Bracket
• Problems and Troubleshooting
  • The following warnings may appear in viewfinder:
  • Smear
  • Poor playback picture on TV monitor liHa
• Condensation (DEW)
  • What is condensation?
  • Condensation is iikeiy to occur when:
  • Preventing condensation
  • When condensation is detected
  • To start using camera again
• Cautions
  • B
  • H
    • F. Always Replace the Lens Cap.
    • G. Do Not Expose the Camera to Shock or Vibrations.
    • H. Avoid Sudden Changes in Temperature.
    • I. Do Not Disassemble the Camera.
    • J. Using the Battery Pack and Recommended Accessories.
    • Using Your Battery Packs Effectively
    • Immediately After Purchase
    • General Use
    • storage
    • Terminology
    • Maintenance
    • Keep the Heads Clean.
    • Clean the Camera with a Soft, Dry Cloth.
    • Store the Camera Properly.
    • Store Cassette Tape Properly. '
    • Check the Operation of Each Component.
• Specifications
  • Australian model
• Canon
  • I- fí''.'!iн' "