Document Outline

• Contents
• Figures
• Tables
• The 4247 Model X03/Z03 Serial Matrix Printers
  • Printer description
    • Print speeds
    • Paper paths
      • Paper path nomenclature
    • Print qualities
      • Print quality selection
    • Printer interfaces
    • Printer datastream emulations
  • How to Use This Manual
• Chapter 1. Personal Printer Data Stream (PPDS)
  • Print Job Processing
  • Page Printing Concept
  • Page Presentation
  • Graphic and Control Character Sequences
  • PPDS Compatibility
  • One-Byte Controls
    • Null (NUL)
    • Bell (BEL)
    • Backspace (BS)
    • Horizontal Tab (HT)
    • Line Feed (LF)
    • Vertical Tab (VT)
    • Form Feed (FF)
    • Carriage Return (CR)
    • Shift Out (SO) / Double-Wide Print
    • Shift In (SI) / Condensed Print
    • Device Control 1 (DC1) / Select
    • Device Control 2 (DC2) / Select
    • Device Control 3 (DC3) / Select
    • Device Control 4 (DC4) / Select
    • Cancel (CAN)
    • Escape (ESC)
    • Space
  • Escape Sequence Controls
    • Null (ESC NUL)
    • Bell (ESC BEL)
    • Backspace (ESC BS)
    • Horizontal Tab (ESC HT)
    • Line Feed (ESC LF)
    • Vertical Tab (ESC VT)
    • Form Feed (ESC FF)
    • Carriage Return (ESC CR)
    • Shift Out (ESC SO) / Doube-Wide Print
    • Shift In (ESC SI) / Condensed Print
    • Device Control 1 (ESC DC1 / Select)
    • Device Control 2 (ESC DC2) / Select 10 CPI
    • Device Control 3 (ESC DC3) / Deselect
    • Device Control 4 (ESC DC4) / Cancel Double-Wide Print
    • Cancel (ESC CAN)
    • Auto Underscore (ESC -)
    • Set 1/8 Inch Line Spacing (ESC 0)
    • Set 7/72 Inch Line Spacing (ESC 1)
    • Invoke Text Line Spacing (ESC 2)
    • Set Graphics Line Spacing (ESC 3)
    • Set Top of Form (ESC 4)
    • Set Auto Line Feed (ESC 5)
    • Select PC Character Set 2 (ESC 6)
    • Select PC Character Set 1 (ESC 7)
    • Set 12 CPI (ESC :)
    • Unidirectional Printing (ESC <)
    • Character Font Image Download (ESC =)
    • Select n/72 Inch Line Spacing (ESC A)
    • Set Vertical Tabs (ESC B)
    • Set Page Length (ESC C)
    • Set Horizontal Tabs (ESC D)
    • Begin Emphasized Print (ESC E)
    • End Emphasized Print (ESC F)
    • Begin Double-Strike Print (ESC G)
    • End Double-Strike Print (ESC H)
    • Change Font (ESC I)
    • Relative Move Baseline (ESC J)
    • Normal Density Bit Image Graphics (ESC K)
    • Dual Density Bit Image Graphics Type 1 (ESC L)
    • Begin Skip Perforation (ESC N)
    • End Skip Perforation (ESC O)
    • Proportional Space Mode (ESC P)
    • Deselect on Positive Query Reply (ESC Q)
    • Set Default Tabs (ESC R)
    • Begin Subscript/Superscript (ESC S)
    • End Subscript/Superscript (ESC T)
    • Set Print Direction (ESC U)
    • Double-Wide Continuous Mode (ESC W)
    • Set Horizontal Margins (ESC X)
    • Dual Density Bit Image Graphics Type 2 (ESC Y)
    • High Density Bit Image Graphics (ESC Z)
    • Print All Characters (ESC \)
    • Reverse Line Feed (ESC ])
    • Print Single Character (ESC ^)
    • Continuous Overscore (ESC _)
    • Relative Move Right (ESC d)
    • Relative Move Left (ESC e)
    • Select Line Scoring (ESC [ -)
    • Set Presentation Highlight (SPH) (ESC [ @)
    • Set Font Global (SFG) (ESC [ I)
    • Set Initial Conditions (SIC) (ESC [ K)
    • Select Code Page (SCP) (ESC [ T)
    • Set Print Quality (SPQ) (ESC [ d)
  • 4247 Commands
    • Select EAN-8 Bar Code (DC4 DC4 ESC ! NN 1 PP EM)
    • Select EAN-13 Bar Code (DC4 DC4 ESC ! NN 2 PP EM)
    • Select UPC-A Bar Code (DC4 DC4 ESC ! NN 3 PP EM)
    • Select MSI Bar Code (DC4 DC4 ESC ! NN 4 PP EM)
    • Select UPC-E Bar Code (DC4 DC4 ESC ! NN 5 PP EM)
    • Select UPC 2-Digit Bar Code (Magazine) (DC4 DC4 ESC ! NN 6 PP EM)
    • Select UPC 5-Digit Bar Code (Magazine) (DC4 DC4 ESC ! NN 7 PP EM)
    • Select 2 of 5 INTERLEAVED Bar Code (DC4 DC4 ESC ! NN 17 PP EM)
    • Select 2 of 5 INDUSTRIAL Bar Code (DC4 DC4 ESC ! NN 18 PP EM)
    • Select 2 of 5 MATRIX Bar Code (DC4 DC4 ESC ! NN 19 PP EM)
    • Select CODE 3 of 9 Bar Code (DC4 DC4 ESC ! NN 20 PP EM)
    • Select CODABAR Bar Code (DC4 DC4 ESC ! NN 22 PP EM)
    • Select CODE 128 Bar Code (DC4 DC4 ESC ! NN 23 PP EM)
    • Select POSTNET Bar Code (DC4 DC4 ESC ! NN 24 PP EM)
    • Print Bar Code Selection (DC4 DC4 ESC ( GS {N1} {DATA1} GS {N2} {DATA2} EM)
    • Reinitialize Printer (DC4 DC4 ESC @)
    • Set Vertical Spacing n/144 Inch (DC4 DC4 ESC 1 NN)
    • Set Vertical Spacing 12 Lines/30mm (DC4 DC4 ESC 3 1)
    • Set Vertical Spacing 3 Lines/30mm (DC4 DC4 ESC 3 3)
    • Set Vertical Spacing 4 Lines/30mm (DC4 DC4 ESC 3 4)
    • Set Vertical Spacing 6 Lines/30mm (DC4 DC4 ESC 3 6)
    • Set Vertical Spacing 8 Lines/30mm (DC4 DC4 ESC 3 8)
    • Eject Single Sheet or Form Feed (DC4 DC4 ESC 5)
    • Set 15, 17.1, 20 CPI (DC4 DC4 ESC A)
    • Load or Park Fanfold from a Rear Path (DC4 DC4 ESC N)
    • Load or Park Fanfold from a Front Path (DC4 DC4 ESC T)
    • Select Emulation (DC4 DC4 ESC Y)
    • Select AFTA in Column (DC4 DC4 ESC Z)
    • Select Resident Font (DC4 DC4 ESC g)
    • Request to Read Configuration (DC4 DC4 ESC h)
    • Printer Configuration Response (DC4 DC4 ESC h)
    • Write Configuration Response (DC4 DC4 ESC i)
    • Write Configuration Acknowledgement (DC4 DC4 ESC i)
    • Select Print Quality (DC4 DC4 ESC p)
  • Buffer Terminating Conditions
• Chapter 2. Epson FX-1050 Data Stream
  • Print Job Processing
  • Page Printing Concept
  • Page Presentation
  • One-Byte Controls
    • Null (NUL)
    • Bell (BEL)
    • Backspace (BS)
    • Horizontal Tab (HT)
    • Line Feed (LF)
    • Vertical Tab (VT)
    • Form Feed (FF)
    • Carriage Return (CR)
    • Shift Out (SO) / Double-Wide Print
    • Shift In (SI) / Condensed Print
    • Device Control 1 (DC1) / Select
    • Device Control 2 (DC2) / Cancel Condensed Print
    • Device Control 3 (DC3) / Deselect
    • Device Control 4 (DC4) / Cancel Double-Wide Print
    • Cancel (CAN)
    • Space (SP)
    • Delete Character (DEL)
  • Escape Sequence Controls
    • Escape (ESC)
    • Null (ESC NUL)
    • Bell (ESC BEL)
    • Backspace (ESC BS)
    • Horizontal Tab (ESC HT)
    • Line Feed (ESC LF)
    • Vertical Tab (ESC VT)
    • Form Feed (ESC FF)
    • Carriage Return (ESC CR)
    • Shift Out (ESC SO) / Double-Wide Print
    • Shift In (ESC SI) / Condensed Print
    • Device Control 1 (ESC DC1) / Select
    • Device Control 2 (ESC DC2) / Cancel Condensed Print
    • Device Control 3 (ESC DC3) / Deselect
    • Device Control 4 (ESC DC4) / Cancel Double-Wide Print
    • Cancel (ESC CAN)
    • Set Intercharacter Spacing (ESC SP)
    • Master Select (ESC !)
    • Cancel MSB Control (ESC #)
    • Set Absolute Print Position (ESC $)
    • Select User-Defined Set (ESC %)
    • Define User-Defined Characters (ESC &)
    • Select Graphics Mode (ESC *)
    • Auto Underscore (ESC –)
    • Select Vertical Tab Channel (ESC /)
    • Set 1/8 Inch Line Spacing (ESC 0)
    • Set 7/72 Inch Line Spacing (ESC 1)
    • Set 1/6 Inch Line Spacing (ESC 2)
    • Set n/216 Inch Line Spacing (ESC 3)
    • Select Italic Mode (ESC 4)
    • Cancel Italic Mode (ESC 5)
    • Printable Code Area Expansion (ESC 6)
    • Cancel Printable Code Area Expansion (ESC 7)
    • Copy ROM into Ram (ESC : NUL)
    • Select Unidirectional Mode (one line only) (ESC <)
    • Set MSB to 0 (ESC =)
    • Set MSB to 1 (ESC >)
    • Reassign Graphics Mode (ESC ?)
    • Initialize Printer (ESC @)
    • Select n/72 Inch Line Spacing (ESC A)
    • Set Vertical Tabs (ESC B)
    • Set Page Length (ESC C)
    • Set Horizontal Tabs (ESC D)
    • Begin Emphasized Print (ESC E)
    • End Emphasized Print (ESC F)
    • Begin Double-Strike Print (ESC G)
    • End Double-Strike Print (ESC H)
    • Printable Code Area Expansion (ESC I)
    • Perform n/216 Inch Line Feed (ESC J)
    • Select Single Density Graphics Mode (ESC K)
    • Select Double Density Graphics Mode (ESC L)
    • Select 12 CPI (ESC M)
    • Begin Skip Perforation (ESC N)
    • End Skip Perforation (ESC O)
    • Select 10 CPI (ESC P)
    • Select Right Margin (ESC Q)
    • Select Character Set (ESC R)
    • Begin Subscript/Superscript (ESC S)
    • End Subscript/Superscript (ESC T)
    • Set Print Direction (ESC U)
    • Double-Wide Continuous Mode (ESC W)
    • Dual Density Bit Image Graphics Type 2 (ESC Y)
    • High Density Bit Image Graphics (ESC Z)
    • Set Relative Position (ESC \)
    • Set Letter Quality Justification (ESC a)
    • Select Vertical Tabs in Channels (ESC b)
    • Relative Move Right n/120 (ESC d)
    • Relative Move Left n/120 (ESC e)
    • Set 15 CPI (ESC g)
    • Feed Paper n/216 Reverse (ESC j)
    • Select NLQ Font (ESC k)
    • Set Left Margin (ESC l)
    • Turn Proportional Mode On/Off (ESC p)
    • Quiet Printing (ESC s)
    • Select Character Table (ESC t)
    • Double High Printing (ESC w)
    • Select NLQ or DP Print Quality (ESC x)
  • 4247 Commands
    • Select EAN-8 Bar Code (DC4 DC4 ESC ! NN 1 PP EM)
    • Select EAN-13 Bar Code (DC4 DC4 ESC ! NN 2 PP EM)
    • Select UPC-A Bar Code (DC4 DC4 ESC ! NN 3 PP EM)
    • Select MSI Bar Code (DC4 DC4 ESC ! NN 4 PP EM)
    • Select UPC-E Bar Code (DC4 DC4 ESC ! NN 5 PP EM)
    • Select UPC 2-Digit Bar Code (Magazine) (DC4 DC4 ESC ! NN 6 PP EM)
    • Select UPC 5-Digit Bar Code (Magazine) (DC4 DC4 ESC ! NN 7 PP EM)
    • Select 2 of 5 INTERLEAVED Bar Code (DC4 DC4 ESC ! NN 17 PP EM)
    • Select 2 of 5 INDUSTRIAL Bar Code (DC4 DC4 ESC ! NN 18 PP EM)
    • Select 2 of 5 MATRIX Bar Code (DC4 DC4 ESC ! NN 19 PP EM)
    • Select CODE 3 of 9 Bar Code (DC4 DC4 ESC ! NN 20 PP EM)
    • Select CODABAR Bar Code (DC4 DC4 ESC ! NN 22 PP EM)
    • Select CODE 128 Bar Code (DC4 DC4 ESC ! NN 23 PP EM)
    • Select POSTNET Bar Code (DC4 DC4 ESC ! NN 24 PP EM)
    • Print Bar Code Selection (DC4 DC4 ESC ( GS {N1} {DATA1} GS {N2} {DATA2} EM)
    • Reinitialize Printer (DC4 DC4 ESC @)
    • Set Vertical Spacing n/144 Inch (DC4 DC4 ESC 1 NN)
    • Set Vertical Spacing 12 Lines/30mm (DC4 DC4 ESC 3 1)
    • Set Vertical Spacing 3 Lines/30mm (DC4 DC4 ESC 3 3)
    • Set Vertical Spacing 4 Lines/30mm (DC4 DC4 ESC 3 4)
    • Set Vertical Spacing 6 Lines/30mm (DC4 DC4 ESC 3 6)
    • Set Vertical Spacing 8 Lines/30mm (DC4 DC4 ESC 3 8)
    • Eject Single Sheet or Form Feed (DC4 DC4 ESC 5)
    • Set 15, 17.1, 20 CPI (DC4 DC4 ESC A)
    • Load or Park Fanfold from a Rear Path (DC4 DC4 ESC N)
    • Load or Park Fanfold from a Front Path (DC4 DC4 ESC T)
    • Select Emulation (DC4 DC4 ESC Y)
    • Select AFTA in Column (DC4 DC4 ESC Z)
    • Select Resident Font (DC4 DC4 ESC g)
    • Request to Read Configuration (DC4 DC4 ESC h)
    • Printer Configuration Response (DC4 DC4 ESC h)
    • Write Configuration Response (DC4 DC4 ESC i)
    • Write Configuration Acknowledgement (DC4 DC4 ESC i)
    • Select Print Quality
  • Buffer Terminating Conditions
  • Unsupported Command Processing
• Chapter 3. Intelligent Printer Data Stream
  • Overview
  • Physical Medium
  • IPDS Coordinate Systems
    • X and Y Medium Coordinate System
    • Logical Page Layout
    • I and B Coordinate System
  • Processing IPDS Commands
  • IPDS Command Format
  • Acknowledge Requests and Replies
    • Acknowledge Reply (ACK)
    • Host Acknowledgment Requests
    • Printer Acknowledgment Replies
  • IPDS Data
  • Mixing Rules
  • IPDS Operating States
    • Home State
    • Page State
    • Overlay State
    • Page Segment State
  • A Summary of the IPDS States and Commands
  • A Typical IPDS Command Sequence
    • Printer Initialization and Preparation Sequence
    • Page Segment Sequence
    • Overlay Sequence
    • Page Sequence
  • Error Handling
• Chapter 4. IPDS Programming Information
  • IPDS Initialization Defaults
    • Parameter Values
  • Command Format
  • Supported IPDS Command Codes for the 4247 Printer
  • Command Function Sets
  • Device Control Function Set Commands
    • No Operation (NOP)
    • Sense Type and Model (STM)
    • Set Home State (SHS)
    • Acknowledge Reply (ACK)
    • Load Font Equivalence (LFE)
    • Code Page ID Values
    • Load Copy Control (LCC)
    • Logical Page Descriptor (LPD)
    • Logical Page Position (LPP)
    • Deactivate Font (DF)
    • End Page (EP)
    • End (END)
    • Execute Order Home State (XOH)
      • Print Buffered Data (PBD)
      • Erase Residual Print Data (ERPD)
      • Erase Residual Font Data (ERFD)
      • Stack Received Pages (SRP)
      • Select Input Media Source (SIMS)
      • Set Media Size (SMS)
      • Obtain Printer Characteristics (OPC)
    • Execute Order Any State (XOA)
      • Activate Printer Alarm (APA)
      • Discard Buffered Data (DBD)
      • Request Resource List (RRL)
      • Exception Handling Control (EHC)
      • Print Quality Control (PQC)
  • Text Function Set Commands
    • Load Equivalence (LE)
    • Write Text (WT)
      • Set Inline Margin (SIM)
      • Set Intercharacter Adjustment (SIA)
      • Set Baseline Increment (SBI)
      • Absolute Move Inline (AMI)
      • Absolute Move Baseline (AMB)
      • Relative Move Inline (RMI)
      • Relative Move Baseline (RMB)
      • Begin Line (BLN)
      • Set Coded Font Local (SCFL)
      • Set Text Orientation (STO)
      • Begin Suppression (BSU)
      • End Suppression (ESU)
      • Draw I-Axis Rule (DIR)
      • Draw B-Axis Rule (DBR)
      • Repeat String (RPS)
      • Transparent Data (TRN)
      • No Operation (NOP)
      • Set Variable Space Increment (SVI)
      • Set Text Color (STC)
      • Overstrike (OVS)
      • Underscore (USC)
      • Temporary Baseline Move (TBM)
  • Image Function Set Commands
    • Write Image Control (WIC)
    • Write Image (WI)
    • End (END)
  • Graphics Function Set Commands
    • Drawing Order Coordinate System
    • Graphic Medium Presentation Space
    • Graphic Window
    • Graphic Block Area
    • Positioning the Graphic Window in the Graphic Block Area
    • Write Graphics Control (WGC)
      • Graphic Area Position Control (GAP)
      • Graphic Output Control (GOC)
      • Graphic Data Descriptor (GDD)
      • Area Mapping Control Options
      • Self-Describing Instructions
    • Write Graphics (WG)
      • Begin Segment Introducer (BSI)
      • No Operation
      • Comment
      • Segment Characteristics
      • Set Pattern Set
      • Set Color
      • Set Mix
      • Set Background Mix
      • Set Fractional Line Width
      • Set Line Type
      • Set Line Width
      • Set Current Position
      • Set Arc Parameters
      • Set Extended Color
      • Set Pattern Symbol
      • Set Marker Symbol
      • Set Character Cell Size
      • Set Character Angle
      • Set Character Set
      • Set Character Precision
      • Set Character Direction
      • Set Marker Precision
      • Set Marker Set
      • End Prologue
      • End Area
      • Begin Area
      • Line at Current Position
      • Marker at Current Position
      • Character String at Current Position
      • Fillet at Current Position
      • Full Arc at Current Position
      • Begin Image at Current Position
      • Image Data
      • End Image
      • Relative Line at Current Position
      • Line
      • Marker
      • Character String
      • Fillet
      • Full Arc
      • Begin Image
      • Relative Line
      • End (END)
  • Related Drawing Orders
  • Bar Code Function Set Commands
    • Write Bar Code Control (WBCC)
      • Bar Code Area Position (BCAP)
      • Bar Code Output Control (BCOC)
      • Bar Code Data Descriptor (BCDD)
    • Write Bar Code (WBC)
  • Code 128 Character Set (EBCDIC)
  • Overlay Function Set Commands
    • Begin Overlay (BO)
    • Delete Overlay (DO)
    • Include Overlay (IO)
  • Page Segment Function Set Commands
    • Begin Page Segment (BPS)
    • Include Page Segment (IPS)
    • Deactivate Page Segment (DPS)
  • Loaded Font Function Set Commands
    • Load Symbol Set (LSS)
• Chapter 5. IPDS Exception Reporting Codes
  • Command Reject - X'80'
  • Intervention Required - X'40'
  • Equipment Check - X'10'
  • Data Check - X'08'
  • Specification Check-Bar Code - X'04'
  • Specification Check-Graphics - X'03'
  • Specification Check-General - X'02'
  • Conditions Requiring Host Notification - X'01'
• Chapter 6. Print Samples and IPDS Coding Example
  • Text Print Samples
  • Bar Codes
  • Graphics Patterns
  • Graphics Example
  • IPDS Coding Example
• Appendix A. Code Pages
  • EBCDIC Code Pages
    • USA/Canada/Canadian Bilingual
    • Canadian French
    • Austrian/German
    • Belgian Old
    • Brazilian
    • Danish/Norwegian
    • Finnish/Swedish
    • Italian
    • Japanese English
    • Portuguese
    • Spanish/Spanish Speaking
    • English (UK)/Ireland
    • Japanese Katakana
    • French/French Azerty
    • Arabic
    • Greek (Old)
    • Hebrew Bulletin
    • International 5/Swiss/Belgian
    • Greek/Latin (ISO 8859-7) + euro
    • Korean
    • Thai
    • Latin 2/ROECE
    • Icelandic
    • Greek New + euro
    • Cyrillic
    • Yugoslav (Old)
    • OCR-A
    • OCR-B
    • Latin 9 (ISO 8859) + euro
    • Cyrillic Multilingual
    • Latin-5 Turkey
    • Farsi
    • Baltic Multilingual
    • Estonian
    • USA/Canada + euro
    • Austrian/German + euro
    • Danish/Norwegian + euro
    • Finnish/Swedish + euro
    • Italian + euro
    • Spanish/Spanish Speaking + euro
    • English/UK + euro
    • French + euro
    • International 5/Belgian New + euro
    • Icelandic + euro
  • ASCII Code Pages
    • USA (Personal Computer) A-54
    • Greek (MS DOS)
    • Greek/Latin (ISO 8859-7)
    • Latin 1 (ISO 8859-1)
    • PC Multilingual
    • Old Greek
    • Latin 2/ROECE
    • Latin 3 (PC)
    • Cyrillic (PC)
    • Latin 5-Turkey + euro
    • PC Multilingual + euro
    • Portuguese
    • Icelandic
    • Hebrew
    • Canadian French
    • Arabic
    • Danish/Norwegian
    • PC Data, Cyrillic, Russian
    • Greek New + euro
    • Thai
    • OCR-A
    • OCR-B
    • Latin 2 (ISO 8859-2)
    • Latin 3 (ISO 8859-3)
    • Latin 4 (ISO 8859-4)
    • Cyrillic (ISO 8859-5)
    • Latin 8 (ISO 8859-8)
    • Latin 5 (ISO 8859-9)
    • Baltic Multilingual
    • Estonian
    • Latin 9 (ISO 8859-15) + euro
    • Urdu
    • Arabic Extended
    • Latin 6 (ISO 8859-6)
    • Farsi (Personal Computer)
    • Estonian (Personal Computer)
    • Latvian (Personal Computer)
    • Lithuanian (Personal Computer)
    • Central Europe Latin 2
    • Cyrillic Windows + euro
  • Epson FX-series Code Pages
    • Extended Graphics Character Table
    • Italic Character Table
    • Epson Extended Character Variables
• Appendix B. Application Paper Source Selection
  • Application-controlled paper-source selection
    • PSF usage - z/OS and System i
      • Paper source identification (media IDs)
      • Creating form definitions (FORMDEFs)
    • System i media selection (other than FORMDEF)
    • Use of 'FORMS' parameters - z/OS and System i
    • Using 4247 with System i Host Print Transform
• Appendix C. 4247 Bar Code and OCR Printing Options
  • Bar Code Printing Options Charts
  • Optical Character Recognition (OCR) Printing
    • OCR Symbols
    • OCR Scanning
• Appendix D. Configuration Menu Lockout
• Appendix E. Interfaces
  • The Parallel Interface
    • Signals Description
    • Operating Phases
    • Parallel Interface Signals
    • Parallel Interface Signals Behaviour
      • Interface Timing
      • Mode IEEE 1284
  • The Serial Interface
    • Serial Interface Signals
    • LAN Interface Port
      • LED Indicators
    • USB Interface Port
• Appendix F. Network Interface Technical Reference
  • 4247 Network Configuration Parameters
  • Managing a Single Printer Configuration Using the 4247 Internal Webpage
    • Configuration Password
    • Storing and Saving Settings
  • Managing Multiple Printers Using the 4247 Remote Printer Management Utility
  • 4247 Network Interface Summary
  • IBM systems - LAN printing technical support documents on the world-wide-web
    • 32815, Configuring a *LAN 3812 SNMP Device Description
    • 19934440, Recommended SNMP Port Number Values for *LAN 3812 SNMP Device Descriptions
    • 8983237, Configuring a Remote Output Queue (RMTOUTQ)
    • 18762910, Configuring a *LAN 3812 Device Description that Uses the LPR Print Driver (TSPLPRD) Exit Program
    • IPDS Services Facility (PSF) printing
      • Configuring a *LAN IPDS Device Description
      • 24475739, Recommended IBM IPDS Port Number Values for *LAN IPDS Device Descriptions
      • G544-3877, PSF: AIX for PSF Users
• Appendix G. LAN Interface MIB Support
• Appendix H. The Remote Printer Management Utility
  • Operating System Compatibility
  • Software Installation and Documentation
• Notices