C4333(P) Guide
User manual for C4333(P)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 194
- 195
- 196
- 197
- 198
- 199
- 200
- 201
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 209
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 222
- 223
- 224
- 225
- 226
- 227
- 228
- 229
- 230
- 231
- 232
- 233
- 234
- 235
- 236
- 237
- 238
- 239
- 240
Table of contents
Document Outline
- Initial Configuration Procedures
- Telnet Method
- 1. Connect the cross-over Ethernet cable supplied with the Primo between the 10/100 Base-T jack a...
- 2. Set DIP switch SW1 to OFF (down) to establish a Telnet connection.
- 3. Plug the power adapter DC plug into the jack labeled DC-IN.
- 4. Plug the power adapter into an electrical outlet.
- 5. Start a Telnet session for either Microsoft Windows or Unix. The following illustrates telnet ...
- a. On the Windows toolbar, select the Start button, then select Run.
- b. Type telnet 192.168.127.254 (use your IP address if it is different from the default) in the O...
- c. Type 1 to select ansi/vt100 for Console terminal type, and then press the Enter key.
- d. If you are prompted for the Console password, type the password and then press the Enter key. ...
- e. Use the keyboard arrow keys to select [serverConfig], and then press the Enter key. The next t...
- f. Use the keyboard arrow keys to position the cursor over the first digit of the IP address. Typ...
- g. Press the ESC key to return to main menu, and then select Restart and press the Enter key to a...
- 6. Optionally remove the Ethernet cross-over cable from the PC host NIC and the Primo. Connect a ...
- 7. Set the DIP switch for your serial device using the following table:
- 8. Connect the appropriate serial cable between the DB9 serial port on the Primo and your serial ...
- 9. Install a device driver on your PC host if you want to use the serial port as a COM or tty por...
- Serial Console Method
- 1. Connect a null-modem cable between the serial port on the Primo and a PC COM port. See The Ser...
- 2. Set SW1 to ON (up), SW2 or SW3 can be set to any position.
- 3. Plug the power adapter DC plug into the jack labeled DC-IN.
- 4. Plug the power adapter into an electrical outlet.
- 5. Start a terminal emulator such as the latest version of HyperTerminal for Windows or Minicom f...
- a. On the Window’s desktop toolbar, select the Start button, then point to Programs, then Accesso...
- b. On the File menu, select New Connection. The Connection Description dialog box appears.
- c. In the Name box, type the desired name and select an icon from the Icon list.
- d. Select the OK button. The Connect To dialog box appears.
- e. From the Connect using drop-down list box, select the COM port that you are using. Select the ...
- f. Select the following parameters:
- g. Select the OK button. The HyperTerminal main window appears.
- h. At the Console terminal type command line, type 1 for ansi/vt100 parameter.
- i. Press the Enter key. HyperTerminal displays a configuration menu.
- j. Select [serverConfig] from the menu.
- k. Press the Enter key. Hyperterminal displays various parameters that are required to configure ...
- l. If you want to set the IP address of the server, use the keyboard arrow keys to position the c...
- m. Using the arrow keys, select Restart from the menu.
- 6. Set the DIP switch for your serial device using the following table:
- 7. Disconnect the null-modem cable from the PC COM port.
- 8. Connect the appropriate serial cable between the DB9 serial port on the Primo and your serial ...
- 9. Install a device driver on your PC host if you want to use the serial port as a COM or tty por...
- Telnet Method
- Connecting a Previously Configured Primo
- 1. Connect the appropriate serial cable between the Primo and the serial device. See The Serial C...
- 2. Plug the power adapter DC plug into the jack labeled DC-IN.
- 3. Plug the power adapter into an electrical outlet.
- 4. Connect a straight-through Ethernet cable between the 10/100 Base-T jack and the network hub.
- 5. Set the DIP switch, using the following table to set the interface mode:
- Replacing Hardware
- 1. Disconnect the power from the Primo to be removed from service.
- 2. Remove the old unit and attach a new or spare Primo.
- 3. Connect the new Primo to the network hub or server NIC.
- 4. Connect the power source to the new Primo.
- 5. If necessary, change the driver to reflect the MAC or IP address of the new Primo.
- 6. If necessary, configure any RS-422 or RS-485 ports to match the previous unit.
- 7. Transfer all cabling from the old Primo to the new Primo.
- 8. It is not necessary to shut down and restart the server.
- The Serial Connector and Building Cables
- Hardware Specifications
- Notices
- Technical Support
Related manuals for C4333(P)
- ZyXEL Communications ZyXEL G-162 Video Gaming Accessories User Manual
- ZyXEL Communications EW103U/A Video Gaming Accessories User Manual
- Western Telematic RSM-8 Video Gaming Accessories User Manual
- Western Telematic RSM-32DC Video Gaming Accessories User Manual
- Western Telematic RSM-32 Video Gaming Accessories User Manual
- Western Telematic RSM-16DC Video Gaming Accessories User Manual
- Western Telematic RSM-16 Video Gaming Accessories User Manual
- Viking Electronics FBI-1A Video Gaming Accessories User Manual
- Viking Electronics DVA-500A Video Gaming Accessories User Manual
- Viking Electronics DVA-3003 Video Gaming Accessories User Manual
- Viking Electronics DVA-2W Video Gaming Accessories User Manual
- Viking Electronics DVA- 1003B Video Gaming Accessories User Manual