Alotofmanuals.com
user manuals database
Categories
Directory
Haier
Conditioners
0010515690
Manual
0010515690 Guide
User manual for 0010515690
Here is the user manual for 0010515690. You can read and download this user guide for free. User's manual, provided by the manufacturer, allows you to use properly your home appliances and electronics.
PDF MODE
ORIGINAL MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1
2
3
4
5
6
...
20
Download User manual for 0010515690
How to use our site?
Our goal is to provide you with an access to the content of the user manual and guide for 0010515690. Using the online player, you can look through the content and go to the page where you will find the solution of your problems with 0010515690.
For your convenience
If looking through the 0010515690 user manual directly on our website is not convenient for you, there are two possible ways: You can use full-screen viewing mode. To start viewing the user manual for 0010515690 on full screen, use the button fullscreen on our player. You can download the user manual for 0010515690 to your computer and save it in your files.
Table of contents
Document Outline
Table of Contents
Installation and Setup
Product Overview
Installation
Initial Hardware Installation to Configure the ATS- NTE
1. Place the DeviceMaster ATS-NTE on a stable surface or attach it to a suitable surface using th...
2. Verify that the compact flash is fully inserted. When installed correctly, the compact flash i...
3. Connect the 15-pin monitor cable from a standard VGA monitor to the VGA connector.
4. Connect a standard PS/2 compatible keyboard (6-pin mini DIN) into the KEYBOARD connector.
5. Connect a PS/2 compatible mouse (6-pin mini DIN) into the MOUSE connector.
Connecting Optional Devices to the ATS- NTE
1. To dial-in and manage the ATS-NTE through a modem, connect an external modem to the AUX A conn...
2. If you want to connect a parallel printer to the system, connect the printer cable to the PARA...
3. Optionally, insert one of the Comtrol approved PCMCIA devices into one of the PCMCIA slots. Th...
4. Optionally, connect the PC104 RocketPort® cable (quad- or octacable) to the SERIAL PORTS 1-8 c...
Powering on the ATS-NTE
1. Connect the power cable into the power supply and connect the power supply (with the latch and...
2. Connect the power cable to a power source.
3. When prompted by Windows, press Ctrl + Alt + Del.
4. At the Windows Login prompt, enter the Administrator’s password. Administrator is the default ...
Other Installation and Configuration Procedures
Configuring the Network Settings on the ATS-NTE
1. Log into the ATS-NTE as an administrator. Administrator is the default password and it is case...
2. Open the Network control panel and select the Protocols tab.
3. Before the ATS-NTE reboots, connect a standard Ethernet cable to the Ethernet port (or ports) ...
Changing the Default Computer and Workgroup Names
1. Right-click the Network Neighborhood icon and select Properties.
2. Select the Identification tab and the Change button.
3. Enter a new computer name and select Ok.
4. To change the Workgroup name, select the Change button, enter a new Workgroup name and select Ok.
5. Reboot the system so that the changes take affect.
Configuring Dialin for NetMeeting
1. From the Start button, select Programs/ Administrative Tools (Common)/User Manager.
2. Select New User from the User menu.
3. Enter the new user name, the user’s full name, and a description.
4. Enter a password and confirm the password.
5. Uncheck User Must Change Password at Next Login.
6. Select the Dialin button.
7. Select the Grant dialin permission to user option and then the Ok button to close the Dialin I...
8. Select the Groups button.
9. Make the user a Member of the Administrators group and select the Ok button.
10. Select Ok to close the New User pop-up.
11. Exit the User Manager.
Setting Up Remote Management
Configuring RAS TCP/IP for Dialin
1. Open the Network control panel and select the Services tab.
2. Highlight Remote Access Service and select the Properties button.
3. To configure a modem on AUX A, select the Network button and go to Step 5.
4. To configure the Xircom Modem 56-GlobalACCESS modem:
5. Select the TCP/IP Configure button.
6. Select Use static address pool, enter a range of valid IP addresses, and then select the Ok bu...
7. Select Ok to close the Network Configuration popup.
8. Select the Continue button in the Remote Access Setup popup.
9. Select the Close button in the Network window.
10. Shutdown and restart the system as prompted.
Client Configuration
Managing Files on the ATS-NTE
Using NetMeeting
Accessing the ATS- NTE
1. If you are using a modem, create a dialup connection to the ATS-NTE and make the connection to...
2. Start up NetMeeting on the client. The following shows the steps for a Windows NT client:
3. Select the Control menu and then Send Ctrl+Alt+Del to log onto the ATS-NTE.
Retrieving Files from the ATS-NTE
1. Start up NetMeeting on the remote system. (Use Accessing the ATS-NTE on Page 14, if necessary).
2. After accessing the ATS-NTE, right-click on the NetMeeting Remote Desktop Sharing icon in the ...
3. Select Add Files in the File menu and select the files you want to transfer.
4. Select Send All or Send a File from the File menu.
5. Close the Transfer Complete pop-ups.
Sending Files to the ATS-NTE
1. Start up NetMeeting on the remote system. (Use Accessing the ATS-NTE on Page 14, if necessary).
2. Select File Transfer from the Tools menu.
3. Select Add Files from the File menu and select the files you want to transfer.
4. Select Send All or Send a File from the File menu.
5. Close the Transfer Complete popup.
PC104 RocketPort Option
Default PC104 Port Configuration
Configuring the Serial Ports
1. Right-click the Network Neighborhood icon and select Properties.
2. Select the Adapters tab.
3. Highlight Comtrol RocketPort and select the Properties button.
4. Highlight the port for which you want to configure COM port characteristics and select Propert...
5. If you selected RS-485 as the communications mode, highlight the port, select Properties and t...
6. To change the name of the PC104 RocketPort adapter or the starting COM port number, highlight ...
7. If you want to set the verbose event log or change the scan rate, select the Options tab.
8. Select Ok to close the Setup window.
9. Select Ok to close the Network window.
10. Reboot if requested by the system.
Connecting Serial Devices
Installing Modems on the RocketPort Serial Ports
Using the ATS-NTE Standard Modem Driver
1. Connect the modem to the serial port you want to configure.
2. Open the Modem control panel and select the Add button.
3. Check the Don’t detect my modem... box and select Next.
4. Highlight Standard 28800 bps Modem and select the Next button.
5. Select the COM port that corresponds to the port number. This example shows connecting a modem...
6. Select Ok to the Modem Setup popup to restart the system.
7. Select Finish.
8. Select Close.
9. Select No, and shutdown and reboot the ATS-NTE.
10. After rebooting the system, open the Network control panel, select the Services tab, highligh...
11. Select the Add button.
12. Select the COM port number that corresponds to COM port installed in Step 5 and select Ok.
13. Select the Continue button.
14. Select Yes, shutdown, and restart your ATS-NTE.
Using the Modem Manufacturer’s Driver
1. If you want to use a modem driver that supports more than the standard 28800 bps default drive...
2. Connect the modem to the serial port you want to configure.
3. Open the Modem control panel and select the Add button.
4. Check the Don’t detect my modem... box and select Next.
5. Select the modem manufacturer and model from the lists, and select Next.
6. Select the COM port number that corresponds to the port number. This example shows connecting ...
7. Select Finish.
8. Select Close.
9. Select No, and shutdown and reboot the ATS-NTE.
10. After rebooting the system, open the Network control panel, select the Services tab, highligh...
11. Open the Remote Access Setup window and select the Add button.
12. Select the COM port number that corresponds to COM port installed in Step 6 and select Ok.
13. Select the Continue button to close Remote Access Setup.
14. Select Yes, shutdown, and restart your ATS-NTE.
RocketPort Serial Port Connectors
DB9 Connectors
Building Additional DB9 Loopback Plugs
DB25 Connectors
Building Additional DB25 Loopback Plugs
RJ45 Connectors
Building Additional RJ45 Loopback Plugs
Building an RS-485 Test Cable
Building Null- Modem Cables
Building Straight- Through Cables
Troubleshooting Serial Ports
Using Test Terminal
1. To start WCOM32, select Test Terminal from the Comtrol program group. The program window displ...
2. Select Open Port from the Port menu. A list of possible COM port numbers displays.
3. Select the COM port you want to test.
Testing a Comtrol Port
1. Place a loopback plug on the COM port you are testing. Make sure all connectors are seated fir...
2. From the Port menu, select Send Test Data. The program sends out a repeating data stream.
3. If further testing is required, select Loopback Test from the Port menu.
Testing an RS-485 Port
1. Connect a straight-through cable from Port 1 to Port 2.
2. Open a session for each port.
3. Enter data into the Port 1 session, the data should appear in the Port 2 window.
4. Enter data into the Port 2 session, the data should appear in the Port 1 window.
Test Terminal Modem Control Signals
Using Port Monitor
Starting Port Monitor
Changing Screen Appearance
Column Setup
Report Configuration
Port Monitor Files
Port Monitor Variables
Using Peer Tracer
Starting Peer
Log Functions
Using Peer
Other Peer Commands
Device Driver and OS Capabilities and Limitations
Certified PCMCIA Adapters
Comtrol Certified PCMCIA Devices
Xircom CreditCard Wireless Ethernet Adapter
Enabling the Ethernet Adapter
1. Power up the ATS-NTE and log in as Administrator.
2. Open the Devices control panel.
3. Highlight the Xircom Wireless Ethernet Adapter Driver from the Devices list.
4. Select the Startup button.
5. Select Automatic for the Start up Type and select Ok.
6. Select Close to close the Devices folder.
7. Close the Devices control panel, then shut down the system.
Changing the Client Name
1. Open the Network Control Panel and select the Adapters tab.
2. Highlight the Xircom Wireless Ethernet Adapter and the select Properties.
3. Edit the Client Name so that it matches the Computer Name in the Identification tab in the Net...
4. Optionally, confirm that the following parameters have the correct preset values. These are ne...
5. Select Ok when parameter values have been confirmed.
6. Select the Close button in the Network folder.
7. Select Yes if prompted to reboot the ATS-NTE.
Setting Up the Utilities
1. From the Start button, select Run.
2. Select the Browse button, locate the following path, and select the Ok button.
3. Select Next for the initial setup window.
4. Select the appropriate Authentication Method and the Next button. The default selection is None.
5. Select Next for the remaining setup options.
6. Select the Finish button when the setup process has completed.
Enabling Wired Equivalent Privacy (WEP)
1. Double-click on the Xircom Client Encryption Manager (CEM) icon on your desktop.
2. Enter the password. The default password is Xircom and it is case-sensitive.
3. If the Xircom wireless adapter has never been configured, the initial status screen for the Cl...
4. Under the Commands menu, select Enter WEP Key...
5. Select the appropriate WEP Key Size, set the WEP Key Type to either Temporary or Permanent, an...
6. Select Ok to save.
7. Select Ok when finished and exit the utility.
8. Double-click on the Xircom Wireless Ethernet Client Utility (WECU).
9. When the initial client utility screen comes up, this message at the bottom of the screen, You...
10. Under the Commands menu in the top menu bar, select Edit Properties...
11. Select the Network Security tab.
12. Select Enable WEP (Wired Equivalent Privacy).
13. Select Ok to close the Properties window.
Verifying the Ethernet Adapter Set Up
1. Before powering up the ATS-NTE again, confirm that the Xircom Wireless Ethernet adapter is plu...
2. Repeat the power up and login sequence.
3. Open up the PCMCIA Control Panel.
4. Highlight the Xircom Wireless Ethernet Adapter and select the Properties button.
5. Select the Drivers tab, verify that the driver is installed and started, and then select the O...
6. Select Ok to close the PCMCIA folder.
Xircom RealPort Modem 56 GlobalACCESS Adapter
Installing Xircom Utilities
1. Place the Xircom CD (Version 2.62) in a shared CD-ROM drive on the network.
2. Browse the CD and execute the Setup.exe file.
3. Select Install Software and Tools.
4. Select Next.
5. Select Next to install the files in a Xircom directory.
6. Select Yes to create the Xircom directory.
7. Select Finish.
Selecting a Country Code
Reconfiguring AUX A as a Standard Serial Port
Using the AUX A Port as a COM Port
1. Select Start/Administrative Tools Common/Remote Access Admin.
2. Select Stop Remote Access Service from the Server menu.
3. Select Yes to stop the Remote Access Service.
Using the CONSOLE Port
Using the CONSOLE Port
1. Connect a null-modem cable from a COM port on a PC or laptop to the port labeled CONSOLE on th...
2. Start a terminal program, for example, HyperTerminal and configure the following CONSOLE port ...
3. Enter the user name and password of a user with a valid login.
Using the CONSOLE Port as a COM Port
1. Open the Services Control panel.
2. Highlight the cmdrmt entry in the Services popup and select the Startup button.
3. Change the Startup type to Disabled and select Ok.
4. Select the Close button in the Services popup.
Troubleshooting and Technical Support
Troubleshooting Checklist
Using the Recovery CD
1. Turn off your PC to access the IDE cables.
2. Install the IDE compact flash adapter using the instructions that came with the adapter.
3. Insert the compact flash into the IDE compact flash adapter.
4. Disconnect any IDE hard drives.
5. Insert the Recovery CD and power on the PC.
6. Select the 2. Boot from CD-ROM item.
7. Select the 1. Restore Hard Drive From CD-ROM item.
8. Select the Restore button when the Hard Disk Recovery Menu appears.
9. During the reboot cycle:
a. Remove the CD from the drive.
b. Turn off the system power.
c. Remove the compact flash from the adapter and insert it into the ATS- NTE.
10. Reconnect the hard drives disconnected in Step 4.
Running the Diagnostics
Customer Support Policy
Technical Support
Repair and Return Policy
Appendix A. Connectors
VGA Connector
PS/2 Keyboard and Mouse Connectors
Ethernet Connectors
Compact Flash Disk Connector
AUX A and CONSOLE Port Connectors
PARALLEL Port
Serial Ports 1-8 Connector (Optional)
Appendix B. Specifications and Notices
Product Specifications
Electromagnetic Compliances
Environmental Condition Specifications
Hardware Specifications
Technical Specifications
Default Operating System Configuration
System
Application
Notices
Radio Frequency Interference (RFI) (FCC 15.105)
Labeling Requirements (FCC 15.19)
Modifications (FCC 15.21)
Serial Cables (FCC 15.27)
Underwriters Laboratory
Important Safety Information
Appendix C. Default System Values
System I/O Address Map
First MB Memory Map
Appendix D. Changing BIOS Configuration
Getting Started
Standard CMOS Setup
1. Press either the Arrow or <Enter> key on your keyboard to select one of the fields (Month, Dat...
2. Press either <PgUp> or <PgDn> to increase or decrease the value of that field.
3. Use the same key sequence to change the time setting.
BIOS Features Setup
Chipset Features Setup
Power Management Setup
PNP/PCI Configuration
Load BIOS Defaults
Load Setup Defaults
Integrated Peripherals
Supervisor Password and User Password
1. Enter the BIOS SETUP program with the Supervisor password.
2. Press the <Enter> key when prompted for a new password.
SVGA Setup Introduction
Index
Related manuals for 0010515690
CA-02
AAON
/
Conditioners
Read
CA-03
AAON
/
Conditioners
Read
CA-04
AAON
/
Conditioners
Read
CA-05
AAON
/
Conditioners
Read
CA-08
AAON
/
Conditioners
Read
CA-10
AAON
/
Conditioners
Read
Brands
★
#
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Cisco
HP
LG
Motorola
Panasonic
Sony
Dell
Samsung
Canon
Honeywell
Yamaha
Garmin
Sharp
John Deere
Brother
Apple
Craftsman
GE
NETGEAR
Pioneer
Casio
Maytag
Whirlpool
Kenmore
Nikon
Singer
Bissell
Frigidaire
All brands
New Manuals
ZyXEL Communications ZyXEL G-162 Video Gaming Accessories User Manual
ZyXEL Communications EW103U/A Video Gaming Accessories User Manual
Western Telematic RSM-8 Video Gaming Accessories User Manual
Western Telematic RSM-32DC Video Gaming Accessories User Manual
Western Telematic RSM-32 Video Gaming Accessories User Manual
Western Telematic RSM-16DC Video Gaming Accessories User Manual
Western Telematic RSM-16 Video Gaming Accessories User Manual
Viking Electronics FBI-1A Video Gaming Accessories User Manual
Viking Electronics DVA-500A Video Gaming Accessories User Manual
Viking Electronics DVA-3003 Video Gaming Accessories User Manual
Viking Electronics DVA-2W Video Gaming Accessories User Manual
Viking Electronics DVA- 1003B Video Gaming Accessories User Manual
Full list